| Technical Data |
|
| Mixture Ratio |
A:B = 100:50 (volume
portions) |
| Solid Contents Resin |
100% |
| Density (23°C / 50%RHA) |
Approx. 1,35 g/cm3 |
| Thermal resistance: |
-20°C / -4°F to +80°C /
176°F |
| Application Temperature: |
+1°C / 34°F to +32°C /
90°F |
| Working Time (23°C /
50%RHA) |
Approx. 5-8 minutes (in the
nozzle). The working time can be extended by special order from the
factory. |
| Can be walked on after: |
Approx. 20 minutes if using
moderate heat (e.g. heat gun, hairdryer)
Approx. 3-8 hours (depending on temperature) |
| Final solidity after: |
Approx. 3-7 days (depending
on temperature) |
ASTM D2047 (James Machine)
(Static Coefficient of Friction) |
Dry: 0,56
Wet: 0,90 |
Abrasion resistant
Based on ASTM C501 |
0,38g (Granite~1g;
Marble~1g-3g; Limestone~>8g) |
| Removing K-Grip: |
The hardened material can be
removed mechanically. The still "wet" K-Grip can be removed
with alcohol (use caution on porous surfaces!) |
| Storage life in unopened
cartridges: |
Minimum 6 months at room
temperature (20°C / 70°F |
| Disposal: |
Empty cartridges and
associated products should be disposed of in accordance with local,
state, or national legislation. |
| Colors: |
Standard: black, off-white,
gray, buff, red, yellow, and luminous
Metallic: gold, silver, copper, blue
Custom colors are also available (minimum order 48 cartridges) |
| Packaging: |
220ml - cartridges with
mixing tube |
|
|
